A trend that I love - that is so very hot right now - is pallet art. And my favorite pieces of pallet art are those that are truly handmade, versus the mass-produced knock-offs that are beginning to pop up in catalogs and home decor stores.
I've spent the past few weeks working on a fun mini pallet art project that was inspired by
this must-see tutorial from Kari at UCreate that I found on Pinterest. I liked the idea of creating a smaller version of pallet art without the effort of using actual pallets. And what I truly love about this particular DIY is that the pallet "slats" look very real, as they are alternated on each row rather than just one giant slat all the way across.
Supplies: Jumbo craft sticks, blank 8"x10" canvas, assorted colors of acrylic craft paints, sanding block or sandpaper, paint brushes, paper towels, stencil for letters, strong glue.
Step One: Cut the rounded ends off of each craft stick, and begin to put them in position on your canvas. All you're doing in this step is seeing how many you will need. You are
not gluing anything down yet.
Once you have them all in place, begin to cut them into different lengths so they will look more like a wood pallet when glued together. (See pictures for examples.) Cut some sticks in half, cut others into 3 separate pieces. There's no precise method.
Step Two: Once you have positioned all of your pieces, it is time to paint your canvas the same base color that your craft sticks will (eventually) be painted. (I chose a greenish-olive color.)
Note: I bought a 2-pack of canvases, which came in handy: I was able to keep my positioned craft sticks on the canvas, and take the other canvas to actually paint. This way, I didn't lose my pattern that I had mapped out.
I painted two quick coats. Let dry.
Step Three: Glue the craft sticks onto the canvas as shown in the photo.
(I used Aleene's Turbo Tacky Glue.) I kept the line of glue toward the "center" of each row of craft sticks, so that any glue seeping out was minimal.
Once all sticks are glued down, let everything dry.
(For the remaining steps, I'm going to call this "the pallet" from here on out.)
Step Four: Using the same paint that you used to paint your canvas, paint a few coats onto the pallet. Let dry.
Once dry, lightly sand the surface of your pallet.
Step Five: Take at least two other colors of craft paint and dry brush those colors onto the pallet. I chose a very pale pink, and brushed that over the green.
Once almost dry, I then took some bright aqua paint and brushed that on, covering about three-quarters of the pallet and then immediately wiped most of the paint off with a paper towel. Time for the green paint again, brush it on, wipe it off.
 |
| "Action shot" of the pallet after wiping a layer of aqua paint off... |
Then I made a wash of navy blue (basically a mix of the navy blue craft paint heavily watered down), and brushed that on over the entire pallet. After letting it sit for about 5 minutes, I then wiped that layer off. I kept repeating this process until I was satisfied with how it looked. Play around with this step and have fun with it. The look I was going for was an old pallet that had been painted over many times in its life.
 |
| A = paint glop; B = post-it edge to the rescue; C = glop is removed! |
Note: If you get any "glops" that don't want to sink in between the pieces of wood, just take the edge of a post-it, run a corner of it in between the slats, and voilá: the glop is removed!
Step Six: Sand the pallet down very well, which will further blend all the colors together and will give it an old, distressed look. Wipe the pallet with a soft cloth to remove any dust. Then decide if you're satisfied with the final color, or if you want to add another layer, or just a few bits of one color here and there. You can't go wrong, so definitely take some time to play.
Note: Make sure to also paint the sides of your canvas to match the pallet. I painted the sides with both the green-olive paint and the bright aqua paint, layered over each other, to match the front of the pallet. You can also cut up more craft sticks and attach them to the sides, then paint, etc. Maybe I'll do that on a future project.
Step Seven: For the words, I made a stencil out of vinyl with my Silhouette Cameo.
I weeded the letters off the vinyl, and then adhered the "outline" of the letters onto my pallet as shown in the picture.
Step Eight: Using a pouncer, and some pale yellow paint, I lightly painted inside the letters.
I then removed the stencil while the paint was still wet, and touched up the letters with a tiny paintbrush. Let dry, and then give the entire pallet - words included - a light sanding to "age" the letters.
Again, it's entirely up to you how much or how little you sand everything.
Step Nine: Make some flowers! I purposely wanted my phrase down the left side of the pallet, so that there would be room for me to attach some flowers. What kind of flowers? How about flowers made out of used dryer sheets!
There are quite a few tutorials for dryer sheet flowers, and after reading several of them plus watching
this helpful video from
Misty of Shabby Beautiful Scrapbooking, I set out to make my own. I'll share how I made these in a future post, but definitely watch Misty's video: her flowers are so beautiful!
Step Ten: Attach the flower with wire around the seam binding ribbon. Attach the paper flower center with super-strong glue. Let dry overnight. Attach some bits of felt to the back of the pallet art, to prevent scratching your walls, whether you hang it up or lean it on a shelf or mantel.
Ta-daah! (That's me singing, with my best gameshow model sweep-of-the-hands to show you my finished work!)
I photographed this on our outdoor bench which has wooden slats. That's kind of funny to me now that I think about it: faux wooden slats photographed on real ones!
Do you have a "husband seal of approval" for your completed creations? If my husband loves the piece, I can hang it in the "public" spaces in our home. If not, well... my craft studio gets a new piece of wall decor! As this passed the test, I'll be hanging this up in our breakfast room next to the windows that face our patio and gardens.
I love the way it turned out, and I don't think you can truly tell this was made with simple popsicle sticks. What do you think? Can you tell?
~Laura
I'm linking up to some great craft and DIY link parties this week, so click on the
buttons below to join in and get inspired! You never know what new tips
you'll learn, or what new projects you'll want to create!
